Whether you're a current member of The Dwarven Rite of Passage who's looking to reward another of kin for reaching their 30th Circle, or if you're that just interested in the process of albredine rings then this is a great guide for you.   I've compiled a detailed walk-through on how to tune a colorless albredine ring to an already tuned ring.  Also, I've included a FAQ section because there are some oddities in the system that can frustrate someone trying to use or tune a ring.

	If you are trying to tune a brand new, unused colorless albredine ring then you' re going to have to "break it in" first.  If this is a used ring, skip to step two.  To break in the ring, simply wear albredine ring.  This will change the color of the ring to the color that has been designated to your character the day you rolled him into DR.  There is no way of changing this color, so if you got a stupid one, tough luck.  Keeping the ring tuned to your natural color is good if you wanted to start a new party-line gweth circle, but know that it will not work with TDRoP.
	Now, Hold the ring you want to tune in your left hand and any blade  in your right.   Then, tap ring.   You will get the message "You tap your albredine ring with a bastard sword (or what ever blade you are using).   The albredine ring resonates with a clear bell-like tone as its color fades away completely."   This clears the ring of it's previous attunement (makes it colorless).   Lets refer to this ring as the "secondary" ring.   The "primary" ring will be the ring  which you want to tune the secondary ring to.
	Put your blade away.  Put your primary ring, in this case it will be a gleaming albredine ring because TDRoP operates on the gleaming channel, in your right hand and the secondary ring, the colorless albredine ring, in your left.
	Now just type, tap ring.   You will get the message "You tap the two albredine rings together.   The surface of the a colorless albredine ring seems to melt and boil for a moment before it hardens again, having changed to a milky white appearance identical to the other ring."   This will attune the secondary ring to the primary ring.
	Note: You will now be holding two rings that look exactly alike.  Be sure that person receiving the secondary ring gets the secondary ring and not the primary.  Otherwise they won't be able to wear or use it.  Rings that have been tuned AND worn will only work for the first person who wears them.  But, if you do mess up you can always start over with step number 1.

Using a ring is very simple.  Follow the steps below:

- type tap albredine ring.  You will get a message saying, You tap your albredine ring, preparing it to send your thoughts out only to those wearing a ring attuned to yours.

- Then, think your message like you would on a regular gweth.

- One tap, one thought.  After you tap and think your message you will then default back to normal gweth thinking mode.  Meaning, you don't have to do anything special to get back to using gweths instead of the ring, it automatically goes back to that.

 

 

Note: Some information on colorless albredine rings was obtained from The Wolf Den - Magical Library.